HOME
FUNDAMENTALS
SETUP
MOVEMENT
REMOTE CONTROL
SENSING
---
Exit
- :
Check Your Understanding:
  1. 1. What range of values do the joysticks provide?
    2. -100 to +100
    0 to +100
    -127 to +127
    +100 to -100
  2. 2. What ROBOTC command allows you to access the values from the Remote Control?
    3. VEX [ ]
    VEXRT [ ]
    VERT [ ]
    HORT [ ]
  3. 3. What are the inputs available on the VEXnet remote control?
    4. 2 joysticks, each with an X and Y axis, 8 buttons on the front, 4 buttons on the top and an accelerometer
    2 joysticks, each with an X and Y axis, 6 buttons on the front, 6 buttons on the top and an accelerometer
    2 joysticks, each with an X and Y axis, 8 buttons on the front, 6 buttons on the back and an accelerometer
    2 joysticks, each with an X and Y axis, 6 buttons on the front, 8 buttons on the back and an accelerometer
  4. 4. The VEXnet joysticks should be calibrated:
    5. Every time you use it
    The first time you use it and after any firmware updates are applied
    Every time you turn the power on
    Before turning the power off

VEXnet Joystick

Calibration
Prev Lesson: Title Here Next Lesson: Title Here