HOME
FUNDAMENTALS
SETUP
MOVEMENT
REMOTE CONTROL
SENSING
---
Exit
- :
Check Your Understanding:
  1. 1. The VEX EDR should be powered OFF when you connect it to the computer.
    2. True
    False
  2. 2. The Master Firmware is:
    3. Software that acts as the users’ processor’s operating system
    Software that acts as the master processor’s operating system
    Software that must be removed before starting with ROBOTC
    Software that is burned into the EDR processor and cannot be changed
  3. 3. The ROBOTC firmware is:
    4. Software that acts as the users’ processor’s operating system
    Software that acts as the master processor’s operating system
    Software that exists only on the users’ computers
    Software that must be loaded onto the EDR each time you use it
  4. 4 .The VEX EDR has two processors. They are the:
    5. Master and super processors
    Master and user processors
    User and usee processors
    Neither. There is only the need for one processor
  5. 5. When selecting the communications port to download firmware to your EDR, if you ONLY see Automatic Selection when selecting the communications port, you should:
    6. Unplug any motors connected to your EDR
    Disconnect the USB A-to-A cable
    Disconnect and reconnect the USB A-to-A cable
    Do nothing. This is the way it is supposed to work

Vex EDR

Driver Installation
Prev Lesson: Title Here Next Lesson: Title Here